WBAF-2 Dual Channel Wideband

  • The WBAF-2 is a 2 channel wide band air-fuel controller suitable for in-car or on-dyno use. This miniature controller is fully encapsulated and completely waterproof and can be mounted in any engine compartment.

  • Measures actual air-fuel ratio or Lambda

  • Compatible with Methanol, Ethanol, Leaded and Unleaded Gasoline. Sensor life is limited when used with leaded gasoline. Our experience is the sensor lasts from 10 to 50 hours of run time on leaded gas, life depends on lead content and number of heat cycles.

  • Easy free-air calibration proceedure

  • Uses the Bosch LSU 4.2 sensor which is accurate and low cost.

  • Unlike many other wide bands, the WBAF-2 output does not vary when power supply voltage changes. This is extremely important in cars running total loss ignition. Voltage output is constant with power supply voltage of 11 to 16 volts.

  • Accuracy is better than +/- 0.1 AFR over the full range.

  • Has 0 - 5 volt linear outputs for each channel which are compatible with virtually any data logging system.

Simple, Accurate, Repeatable, and Reliable!
Ordering info and pricing:
WBAF-2 with 1 Sensor $ 360
SEN-43 sensor for WBAF $ 110