|
General
- Size: 6¾”L x 5¼”W x 1¾”H for 3 thru 20
channel models, 2¾”H for 30 and 38 channel models.
- Approximate Weight: 1 lb (excluding
sensors and cables).
- Power: 11-17 V DC, 120ma (plus sensor
loading).
- Operating range: 0 to 70ºC, 95% RH
non-condensing.
- Dust proof and splash resistant. Can be
mounted in NEMA box if weatherproofing is required.
- Extruded anodized aluminum case.
- Communications: RS 232 @ up to 57,600
baud.
- Connections via gold plated high density
26 pin ports.
- All units upgradeable to add channels,
memory etc.
Digital RPM / Frequency
Inputs
- 3 or 5 channels, Range of 0 to 800 Hz.
- Optimized for measuring RPM in the
automotive environment.
- 16 bit resolution. Accuracy better than
.05% full scale.
Sampling and Data
Storage
- User definable sampling rates up to 500
per second.
- Up to 3 simultaneous sampling rates.
- 128K or 512K internal memory (downloaded
thru RS 232)
- 128K to 4MB storage on PCMCIA SRAM
Cards.
- Manual trigger, threshold trigger, or
burst mode recording.
- Recording configuration stored in
non-volatile memory.
Analog Inputs
- 4, 8, 16, 24, or 32 single-ended
channels.
- Resolution: 8 or 12 bit, each channel
user definable.
- Accuracy better than .25% of full scale.
- Linearity better than .08% of full
scale.
- Input range of 0-5v, 1-5v, 1-6v, or user
definable.
- 5v and 12v sensor excitation.
- Inputs protected to +/- 35 volt faults.
- Input impedance 1012 Ohms.
- Anti-alias filters on all channels user
definable when ordering.
- In-line amplifiers available for
thermocouple or strain gauges.
Other
- Switch input for record triggering.
- Interrupt input for marking data
segments.
- Digital LCD option for laptime & MPH.
- Status and low power LEDs.
- PCMCIA card slot compatible with type 2
and higher.
- Full line of sensors available.
- Custom cable harnesses
- Gel Cell battery option.
Send mail to sara@competitiondata.com with questions or comments about this web site.
Copyright © 2002-2007 Competition Data Systems
|
