TEMPERATURE SENSORS

Index:

SEN-22 LOW COST MINIATURE TIRE TEMP SENSOR

Range: 50 - 300 Degrees F This sensor has been developed specially for reading tire temperatures in racing applications. Narrow field of view (22 degrees) so that it reads a .8" spot size when 2" from the tire. Easily mounts using 2 female threads on its face 0-5v output, No Amplifier required

SEN-3 CYLINDER HEAD TEMPERATURE PROBE

Range: 32 - 1000 Degrees F These probes have been developed specially for on track racing applications. Installs under spark plug. Ideal for all air cooled engines. Available in 12, 14 and 18 mm diameter. Consult your engine builder for information on expected temperatures.

OTHER THERMOCOUPLES

SEN-16
EXHAUST GAS TEMPERATURE (EGT) PROBE

• Range: 32 - 1830 Degrees F

• These EGT probes have been developed specially for on track racing applications.
• Exposed tip design provides quick response.
• Installs using weld type compression fitting (included).
• Consult your engine builder for recommendations on installation location and expected temperatures.

SEN-21N, SEN-21NH
INFRA-RED TEMPERATURE SENSOR
(NARROW ANGLE)

• Range: SEN-21N for up to 500° F
• Range: SEN-21NH for over 500° F
• Use 21N for measuring tire or other “low” temperatures.
• Use 21NH for brake rotor, clutch disk, or other “high” temperatures.
• Has 1:3 sight ratio, so that if the tire is 3” away from the sensor, it “sees” a 1” diameter spot.
• Includes air purge fitting.
• Requires SEN-5 Amplifier.

SEN-21L
INFRA-RED TEMPERATURE SENSOR
(LOW COST)

• Range:

• For measuring tire or other “low” temperatures.
• Has 1:1 sight ratio, so that if the tire is 1” away from the sensor, it “sees” a 1” diameter spot.
• Mounts via threaded body.
• Requires SEN-5 Amplifier.

SEN-5S
SINGLE CHANNEL THERMOCOUPLE AMP

• Size:

• Amplifies and provides cold junction compensation to low level signals from type K thermocouples or infrared sensors.
• Amplifier mounts close to signal source to boost signal to 0-5 volts for improved noise immunity.
• Terminal strip connection for easy field replacement of thermocouple.

SEN-5T (3 CHANNEL), SEN-5Q (4 CHANNEL)
THERMOCOUPLE AMP

• Size:

• Amplifies and provides cold junction compensation to low level signals from type K thermocouples or infrared sensors.
• Ideal for measuring EGT on 6 or 8 cylinder, use 1 amp per cylinder bank.
• Includes quarter turn quick disconnect for quick removal of headers between passes on drag cars.

SEN-31
AIR TEMPERATURE SENSOR

• Range:

• For intake air, cowl, or other air temperature measurements.
• 3/8” MPT connection.

  ---

  
  SEN-30
  FLUID TEMPERATURE SENSOR

• Range:
• 32 - 300 Degrees F
• For water, oil, or other fluid temperature measurements.
• 1/8” MPT connection.

SEN-32
FLUID TEMPERATURE SENSOR

• Range:

• For water, oil, or other fluid temperature measurements.
• 3/8” MPT connection.

Home  |  Products  |  Support  |  Downloads  |  Links Contact Us  |  About Us  |  News  |  Search  |  Forums

Send mail to sara@competitiondata.com with questions or comments about this web site.
Copyright © 2002-2007 Competition Data Systems